1.rom.bin: Mb s/w
2.bootv106_clone.bin: Mb clone bootloader
3.bootid.bin: Mb bootid
4.m.bin
how to program the first s/w to mb clone?
Firstly replace the mb flash with new flash, it will not start.
Run gxdump.exe
to setup the following parameters:
Act: Read
base: C000
lenth: 4000
3. Click saveas: To same the file bootid.bin, then click open, then link. Start the mb power, you will get the file bootid.bin.
Copy the file bootid.bin to mbclone folder, then run minibox_clone.bat, you will get new file m.bin.
You can use gxdump.exe to program the file m.bin into flash or you can use the mb2 flash programmer to program it.
Note: Every flash the bootid is different, so every flash need read the bootid.bin. In the future, then we can release s/w to update directly!