init hdmi on i2c 1 bus.
--------------------CAT6612 reg 0x1 = 0xca, *************
Net: ip3902
Board Opts: EthOsc HDMI PAL
Splash: done
u-boot startup time so far: 1092 msec
Hit any key to stop autoboot-----: 0
STB225v1 nand# run menu
## Error: "menu" not defined
STB225v1 nand#
## Error: "menu" not defined
إذا ما تركت الجهاز يقلع هذا ما احصل عليه في الاخير
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00ffc024: 0xdbbe instead
Further such events for this erase block will not be printed
Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes
empty_blocks 224, bad_blocks 0, c->nr_blocks 1024
VFS: Cannot open root device "mtdblock4" or unknown-block(31,4)
Please append a correct "root=" boot option; here are the available partitions:
2c00 128 mtdblock_robbs0 (driver?)
1f00 128 mtdblock0 (driver?)
2c01 1024 mtdblock_robbs1 (driver?)
1f01 1024 mtdblock1 (driver?)
2c02 512 mtdblock_robbs2 (driver?)
1f02 512 mtdblock2 (driver?)
2c03 4096 mtdblock_robbs3 (driver?)
1f03 4096 mtdblock3 (driver?)
2c04 16384 mtdblock_robbs4 (driver?)
1f04 16384 mtdblock4 (driver?)
2c05 128 mtdblock_robbs5 (driver?)
1f05 128 mtdblock5 (driver?)
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,4)
و الواضح انه فيه مشكلة في الكرنال اي النواة
ارجو من الخبراء مساعدتي لاني اضن انه يجب تحميل النواة من جديد