First, a new image to the usb install the latest version of cihazımıza: (1) Vu + Duo USB with the image and build
After installation to be done after the installation settings:: (2) Vu + Duo first setup settings
Seçilidi HDMI.
1080i is selected.
Turkish ******** was chosen.
DHCP on the network.
At the point where you can search the channel or canal Stock List can install this. If you want to call before you'll need to channel tuner settings.
For more information about how to channel call: (4) Vu + channel search and the favorite of creating Duo
We check the setting network.
Menu> Setup> System> Network in the "Network hardware settings" kumandamızın point to the "OK" button.
Under the section for the current settings by getting the IP address of shout. (Channel settings when you install will have to get back the value of the rope.)
If the link I gave about the problem, review the network setup issue: Vu + wired / wireless network setup and test procedure
Channel settings before installing the Menu => Setup => System => Customize section, change the user experience as a specialist.
Now you can install Settingimizi Channel: 4 Channel with a different method throw list (Contacts).
 
Twin VU + Duo & Solo & Xtrend ET-9000 HDTV Channel Setting 24-04-2011 channel settings loaded. @ Galaxy2002
Do not forget to reboot after installing the device channel settings.
Menu> Setup> Satellite configuration> Tuner Tuner settings: Settings section to come.

Tuner A: (simple), Not Set, set the way you want.
Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 23.5 ° / 39 ° / 9 ° / 4.8 ° / 16 °
Note: Notice that after you install the tuner ayarlamızı have made our list before the channel. Thus, due to the possible setting names of different satellites have prevented errors in the satellite broadcasting can be taken.
Menu => Add-ons section came Kumandamızın Red button (Add-ons) are pressed. Updating the software catalog on the screen a message that says the system for a while after their stay will be a list of plugins into categories. When you press the OK button on the remotes come in any category, that category will be a list of add-ons. Here you installed is not built off ekelentilerdir olanalar. You want to install (or you want to remove), add-ons by checking the set up here (or remove).

Add-on manager;
The system is not active under the category PermanentClock.
The system password is assigned under the category Setpasswd.
StartUpService Canal System under the category D
Under the Software category VlcPlayer
SimpleRSS mail news under the Multimedia category (not active)
Multi-media, press and hold the arrow under the VirtualZap
Under media Weatheer Plugin Istanbul, Ankara and Mersin set.
YouTubePlayer established under the Multi-media
Install (or uninstall) and re-start after the end of the process tamamalandığı istemedğimiz with the question of whether a window will pop up. "Yes" by pressing the OK button on the Kumandamızın devices, while providing a reboot.
Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
set as the startup service: Kanal D
Emu are doing the installation:
E2_CCcam_2.2.1_bh download file such as / tmp folder are sending below. Black Hole in the Addons Manager (kumandamızın green and yellow button pressed to come to this section), pointing to the Manual Install Bh packges kumandamızın pressing the OK button. While on file What kumandamızın again and press OK on the menu, yes I do the installation, and select OK uşuna.
 
CCcam 2.2.1 Established | Established 1.3.5a Mgcamd | Bulsat ***** For File loaded.
***** File for Bulsat Load:
*****ed by pinkyto0o Bulsatcom mgcamd_1.35a would remove enigma2 download and unzip. Unzip the folder in the extracted
mgcamd_1.35a file via ftp / usr / bin under the taking. (Available on the print the file)
making the value of chmod 755.

CCcam.cfg file / etc folder is located under. Server uses this knowledge to the file server must not resist.
Backupda active glass: Mgcamd, cccam2.2.1 use cccam server to be activated. Server information can be entered to the following:
Entering information in the file server Cccam.cfg

Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and update k.ey do.
To set up Hacksat telnette
Code:
Export MALLOC_CHECK_ = 0
ipkg install-force-overwrite / tmp / Hacksat *
give the command.
If the installation fails again, try to give the following command:

ipkg update
 
When you want to install plugins as external. Ipk file via ftp / tmp directory when you throw your remote, press the yellow before the green drop-down menu "Manual Install the ipk packges" remotes come on the "OK" button. You will see that you want to install the ipk file. Kumandamızın was selected even though the "OK" button you can install.
tunisiasat manager_3.0 download-addons-founded.

enigma2-plugin-extensions-dreamexplorer_6.9_mipsel.ipk was downloaded.
enigma2-plugin-extensions-subtitleplayer_3.05_mipsel.ipk file was downloaded and
 
Menu => Add-ons => tunisiasat-addons-manager_3.0 tunisiasat plugins to come in here, "Netradioturk_2.5" and "LiveFootbal" was established
Nstreamplayer was 0.3 plugin.

WebMedia plugin was downloaded. (@ Niendorfer)
If you want to install the first green and then yellow button remotes Skin. Black Hole Addons Manager> Addons Download Manager> Black Hole E2 Image Skins section can come in different skins.
Army CurveHD installed skins
I gave a link below if you wish to change the subject by utilizing funds bootlogo and radio:
Vu + Bootlogo exchange program and use ...
Picon file if you want to upload. Türksat_Hotbird_Astra19_Eutelsatw3 picon file download and unzip the folder remove ndirdiğiniz / usr/share/enigma2 / directory should be submitted under. There is no bacupta.DOWNLOAD NFI