الجديد:
fix youtube

1.open p.a.tch: exit mainmenu, select "F1+000"

2.page up: provide ID

3.page down: Current Key Menu

4.update sw: copy "XXX.bin" to USB disc, than go to USB Menu and select "XXX.bin".

5.cable network setting:
  a.enter "Main menu->Network Setting->Network Setting"
  b.select "Link type" in "Cable"
  c.enter "Main menu->Network Setting->Network Setting->Cable IP Setting"
  d.Type------press "Right" or "Left" to change the network connect type in "DHCP" and "Static". 
  e.RED BUTTON -- apply the IP setting
  f.YELLOW BUTTON -- change Port
  g.BLUE BUTTON -- reset the mac address,and auto get IP address through HDCP.
    
6.how to use the wireless:
  a.enter "Main menu->Network Setting->Network Setting"
  b.select "Link type" in "Wireless"
  c.enter "Main menu->expansion->Network Setting->Network ip Setting->Search access pointer"
  d.connect one access pointer
  e.after connect success, go to "Main menu->expansion->Network Settings->Network IP Setting->IP Situation" to setup the IP
  f.RED BUTTON -- apply the IP setting
  g.YELLOW BUTTON -- change Port
  h.BLUE BUTTON -- reset the mac address,and auto get IP address through HDCP.
7.How to use 3G:
  a.enter "Main menu->Network Setting->Network Setting"
  b.select "Link type" in "3G"
  c.enter "Main menu->expansion->Network Setting->Network ip Setting->3G Modem Setup"
  d.Mode------press "Right" or "Left" to change the 3G Mode in "Auto" and "Manual".
  e.auto--we will help you find an available 3G and connect it
  f.manual-- you need select Area and Operator,then modify APN.
   
8.how to open Twin Protocol 
  a.open p.a.t.ch
  b.go to Main Menu->Installation->P.a.t.ch Menu
  c.Set Mode to Twin Protocol 

9.how to open Net Share 
  a.open p.a.t.c.h
  b.go to Main Menu->Installation->P.a.t.c.h Menu
  c.Set Mode to Ethernet CSC
10.how to open SDS
  a.open p.a.t.c.h
  b.go to Main Menu->installation->P.a.t.c.h Menu
  c.Set Mode to SDS
 
11 how to factory default
  a.enter "Main menu->channel manager->factory default"
  b.input password
  c.select a type to back to default

12 how to change password
  a.enter "Main menu->system settings->parental control"
  b.input password.
  c.select "change PIN" to "YES"
  d.input new password.